ProTag 3 Phase Appliance and Lead Tester

Overview: A 5 pin, 20 Amp and 32Amp, 3 Phase Appliance and Lead Tester with in-built LCD display.

Application:

• Performs an earth bond test on Appliances and Leads and displays the result on the in-built LCD display
• Performs leakage current measurement on Appliances and Leads and displays the result on the in-built LCD display (mA)

Features:
Most three phase equipment incorporates electronic circuitry such as temperature controls, PLCs which control relays, or motors which require starter circuits such as contactors.
All of these types of controls, contactors and relays must be powered on to latch. Performing an insulation resistance test on such devices will only test up to the on/off switch and not show any faults inside the actual appliance.
The Protag PAC-3P replace insulation testing by powering-up the three phase appliance and measuring the leakage current. The PAC-3P provide a safe way of testing three phase appliances, at all speeds and settings, whilst taking a quick and easy measurement on the LCD display.

Tests and Specifications:

        Earth Continuity Test

• Display Range 0.1ohm to 20ohm
• Test Current 200mA
• Pass/Fail Limit 1ohm
• Accuracy better than 5% at 1ohm

       Current Leakage Test

• Display Range 0.15mA to 9.99mA
• Pass/Fail Limit 5mA
• Accuracy better than 5% at 5mA

       Power Source

• 2 x 9V Batteries

       Accessories

• 20A and 32A extension lead test adaptor with earth test pin

Warranty

• 12 Months

NOTE:  This instrument is intended for use by adequately trained personnel who are AS3760 competent.